Yale produces rope tools for a variety of industrial and other uses.
YaleGrips may be used for temporary or permanent eyes, both in midspan or on the end.
ZipGrip is a patent-pending system to allow the installation of a pulling or holdback eye on various cylindrical or nearly cylindrical substrates.
Yale produces a wide variety of slings and rope tools for use by arborists.
Select any field to filter results below.
|Rope ID||Rope Name||MET|
|65||Long Shot Throw Line|
|68||Tandem Stopper Assembly|
|70||TechEye and TechJoin|
Bee-Line Prussic offers high heat resistance provided by its Vectran core and a 75% / 25 % Technora / Polyester braided cover. Bee Line has one of the highest heat-resistant covers available in the market.
Guardian Brace is an excellent fiber alternative to steel cable. It is easy to splice and easy to adjust in the field. Guardian dramatically reduces your installation costs because there is no hardware required. It is also much lighter and easier to work with.
Long Shot throw line is a UHMPE (Spectra) fiber that has been Maxijacket coated for toughness and anti-snagging commonly found in other throw lines.
Maxi-Flip wire core flip lines have Free Flex end terminations to minimize the in-use wire rope axial fatigue. This provides the climber with the safest possible end termination.
Split Tails are used to form a bridge from the climber's saddle to the running end of the rope where it is tied off with a suitable friction hitch. A 16-strand rope is fabricated for use as a split tail friction knot. Its firm but flexible construction creates a positive-control sliding friction knot.
An appropriately sized Tandem Stopper Assembly is the only recommended midspan termination technique for Unitrex. When properly configured, it is rated to the full working load of the underlying Unitrex. Other conventional termination devices / techniques have been demonstrated to cause an unacceptable amount of damage to Unitrex when tested.
The Ultrex winch line featuring the Chook is the leading solution for your chipper winch needs. We created the Chook to succeed the traditional steel hook that is generally used with chipper winch lines.
YaleGrips are made from a Technora® Aramid fiber at braid and are assembled in a 4-leg configuration extending from a reinforcing, securing eye. The eye is covered entirely with an extra layer of braid, which is saturated with Maxijacket urethane, an abrasion-resistant coating for extended life.