Arborist Slings and Rope Tools

Yale produces a wide variety of slings and rope tools for use by arborists.

Featured

Maxi-Flip Lines

Maxi-Flip Lines use Free Flex Flemish eye splice, are lightweight, utilize the best hardware available and are CE approved EN358.

Learn more

Dynamic Energy in Arborist Rope

One of the most misunderstood aspects of rope selection is the disconnect between breaking strength and a ropes ability to absorb dynamic loads.

Learn more

Adjustable Slings

Easily replaces a variety of different slings, accommodating different-sized loads. Infinitely adjustable.

Learn more

Filter Ropes

Select any field to filter results below.

Rope Name

Rope ID Rope Name MET
59 Yalex Adjustable Slings
63 Dead Eye Slings
65 Long Shot Throw Line
66 Maxi-Flip Lines
67 Split Tails
87 Ultrex Chook
88 Guardian Brace
89 Bee-Line Prussic

Bee-Line Prussic offers high heat resistance provided by its Vectran core and a 75% / 25 % Technora / Polyester braided cover. Bee Line has one of the highest heat-resistant covers available in the market.

Featured Applications

Arborist

Manufactured with Maxijacket-coated Double Esterlon or Polydyne, each unit has a chafe sleeve-covered small or large eye. Dead Eye slings, as with rigging lines, are color coded for easy identification in the field.

Featured Applications

Arborist
Industrial

Guardian Brace is an excellent fiber alternative to steel cable. It is easy to splice and easy to adjust in the field. Guardian dramatically reduces your installation costs because there is no hardware required. It is also much lighter and easier to work with.

Featured Applications

Industrial

Long Shot throw line is a UHMPE (Spectra) fiber that has been Maxijacket coated for toughness and anti-snagging commonly found in other throw lines.

Featured Applications

Arborist

Maxi-Flip wire core flip lines have Free Flex end terminations to minimize the in-use wire rope axial fatigue. This provides the climber with the safest possible end termination.

Featured Applications

Arborist

Split Tails are used to form a bridge from the climber's saddle to the running end of the rope where it is tied off with a suitable friction hitch. A 16-strand rope is fabricated for use as a split tail friction knot. Its firm but flexible construction creates a positive-control sliding friction knot.

Featured Applications

Arborist

The Ultrex winch line featuring the Chook is the leading solution for your chipper winch needs. We created the Chook to succeed the traditional steel hook that is generally used with chipper winch lines.

Featured Applications

Arborist

Easily replaces a variety of different slings, accommodating different-sized loads. Infinitely adjustable.

Featured Applications

Arborist
Industrial