Yale produces double braid ropes for a variety of industrial uses.
Select any field to filter results below.
|Rope ID||Rope Name||MET|
Aracom Miniline combines a low helix angle core of Technora® Aramid with a very tightly woven over-braid of thin polyester. Aracom Miniline provides the maximum strength–to-weight ratio in a composite Aramid polyester construction.
Crystalyne is a double-braided rope constructed with an inner load-bearing core of Vectran Liquid Crystal Polymer (LCP) and has a tough polyester outer sleeve. LCP is more tolerant of bending than other high-modulus fibers and is not as affected by overloading.
Double Esterlon is a double-braided rope constructed of premium over finish polyester fiber in both the sleeve and core. This product is identified by two green strands braided into the cover structure and is available with optional Maxijacket urethane coating to further enhance the rope’s wear resistance.
Kernmaster is a static-rappelling line constructed with a traditional "mantle" sleeve consisting of 48 strands of polyester. The inside, or "kern," is a braided core of energy-absorbing nylon. The core is fully steam-stabilized to enhance the rope's flexibility and prevent hardening in service.
Maxibraid Plus is a double-braided rope constructed of an inner load-bearing core of Ultra High Weight Molecular Polyethylene (UHMWPE). The polyester outer sleeve is slightly thicker than Ultrex Plus, which would provide more abrasion resistance in high-wear applications.
Mega Max is double braid rope with a unique design that provides the ultimate in abrasion protection while still providing the highest strength possible, all in a Ultra High Molecular Weight Polyethylene (UHMWPE) fiber construction.
Polydyne is a double-braided rope that utilizes a polyester sleeve over a nylon core. Despite the dissimilar stretch characteristics of these fibers, Yale engineers have produced constructions where both fibers contribute.
Portland Braid double-braided polyester offers high value at a very competitive price. Built in the same manner as our Double Esterlon, Portland Braid offers consistent performance at an economical price.
Ultrex Plus is a double braid constructed of an inner load baring core of Ultra High Molecular Weight Polyethylene (UHMWPE), treated with Maxijacket coating for enhanced toughness. Sleeved with high-tenacity polyester, Ultrex Plus is spliceable, using conventional high-modulus splice techniques or the new Yale tuck splice, which shortens the bury portion and minimizes the length of the larger diameter associated with a bury-type splice.