Polydyne \ High Strength Double Braided Rope

Available with
Maxijacket coating

Data

Working load is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of line’s rated working load constitutes hazardous shock load and would void normal working-load recommendation. Consult Yale Cordage for guidelines for working loads and safe use of rope. Polydyne is made to Yale Cordage Specification #YCI-PD-012

Polydyne™ is a high strength double-braided rope incorporating a polyester sleeve over a nylon core. Polydyne™ maximizes load sharing between core and sleeve, yielding extremely high strength and high working energy absorption capacity. Nylon supplies “give” and “polyester” abrasion-resistance, and a willingness to cycle to a high percentage of break. Polydyne is identified by two green strands separated by a white strand braided into the cover of the rope. Specific Gravity: 1.24

Dielectric Strength
The maximum allowable leakage for new dry Polydyne is 2.0 milliamperes at 60 K DC volts when tested in accordance with Yale Cordage Test Method DTP-185. Caution: Absorbed and entrained moisture or impurities will increase a rope’s conductivity dramatically.

Elastic Elongation

The colored area under the curve represents the rope’s energy-absorption capability.

Green working 1,040 ft. lbs./lb.
Red ultimate 9,700 ft. lbs./lb.

Print this page