Ultrex Plus \ UMHPE Core Polyester Sleeve Rope

Ultrex Plus Rope Available with
Maxijacket coating

Data

Ultrex Plus Data

Working load is based on tatic or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of line’s rated working load constitutes hazardous shock load and would void normal working-load recommendation. Consult Yale Cordage for guidelines for working loads and safe use of rope. Ultrex Plus is made to Yale Cordage Specification #YCI-UXP-026

Ultrex Plus is a double braid of ultra-high-molecular-weight polyethylene, treated with Maxijacket coating for enhanced toughness. Sleeved with hightenacity polyester, Ultrex Plus is spliceable utilizing conventional high-modulus splice techniques, or the new Yaletuck splice, which shortens the bury portion and minimizes the length of the arger diameter associated with the splice. All strengths shown are for spliced line. Ultrex Plus is identified by green and yellow strands braided into the sleeve structure.

 

Specific Gravity: 1.18

 

Dielectric Strength
The maximum allowable leakage for new dry Ultrex Plus is 1.0 milliamperes at 60 K DC volts when tested in accordancewith Yale Cordage Test Method DTP-185. Caution: Absorbed and entrained moisture or impurities will increase a rope’s conductivity dramatically.

Ultrex Plus Elastic Elongation

Elastic Elongation


The colored area under the curve represents the rope’s energy-absorption capability.

  • Green working 219 ft. lbs./lb.
  • Red ultimate 3,617 ft. lbs./lb.

Print this page