Single Braided Rope | Single Braid Rope


8 Item(s) Show per page Sort by Set Descending Direction
  1. Poly-Plus 12 Poly-Plus 12

    Poly Plus 12 is a single braided rope constructed of high-tenacity polyester plied over “para-ep” polyolefin in each individual strand. A unique plying technique optimizes abrasion resistance. The “para-ep” provides body to the rope and enhances its handling characteristics while keeping the rope’s weight to a minimum. Polyale Plus is the strongest single-braid polyester/polyolefin blend available.
  2. Maxibraid Rope Maxibraid

    Maxibraid™ is a single-braid rope constructed of UHMPE fiber. This fiber has the highest strength-to-weight ratio of any synthetic or natural fiber, and it floats. The integral Maxijacket coating firms the construction, increases wear life, and helps keep contaminants out of rope. Maxibraid also has extremely low stretch, and it is laid firmer than Ultrex, sacrificing tensile strength for longevity in tough field conditions.
  3. Vectrus Rope Vectrus
    Vectrus™ is a single-braided rope of 100% Vectran (LCP, Liquid Crystal Polymer) with a Maxijacket coating to enhance abrasion resistance. LCP is more tolerant of tighter bending radii in terminations than other high-modulus fibers. Vectran LCP thrives at high loads and carries a four-to-one load rating. Vectrus is normally coated with clear Maxijacket urethane, enhancing its ultraviolet resistance, abrasion life, and snag resistance.
  1. Yalex Rope Yalex

    Yalex is a single-braid, 12-strand rope constructed of Performance Fiber’s type 1W81 high-tenacity polyester. (This is the same polyester we use in our flagship Double Esterlon product.) Yalex always is finished with a Maxijacket coating to optimize the abrasion life of the rope. The strongest of all Yale’s polyester ropes, Yalex also is extremely easy to splice.
  2. PE-12 Rope PE-12
    PE-12™ is a 12-strand, single-end-per-carrier polyester. This product is made from the same economical fiber we use in Portland Braid, and is treated with Maxijacket C-grade coating to optimize abrasion resistance. PE-12 is easy to splice and repair if damaged in service. Available in several brilliant colors for phase identification, PE-12 comes in unlimited lengths.
  3. Lugger Line Rope Lugger Line

    Lugger Line™ is a 12-strand single braid of copolymer olefins. Polypropylene and high-density polyethylene are co-extruded to form the fiber. Upon cooling, the molten polyethylene and polypropylene material coalesce into a unique fiber with tenacity comparable to polyester and without the internal friction associated with polypropylene filament. The rope is lightweight, floats, and remains flexible even in freezing conditions, and it won’t kink or hockle.
  1. Ultrex Rope Ultrex

    Ultrex™ is a single-braid rope of 100% UHMPE fiber with our Maxijacket coating for superior abrasion resistance. Ultrex’s braid angles and twist level are designed to optimize break strength. With better bend-over-sheave resistance than other high-modulus fiber ropes, Ultrex has zero water absorption and maintains its flexibility even in freezing conditions.
  2. Aracom 100 Rope Aracom 100

    Aracom® 100 is a self-supporting Technora® Aramid single braid that is extremely easy to splice. Aracom 100 is made with efficient use of Aramid with respect to strength translation.