Maxibraid is a 12-strand single-braid rope constructed from Ultra High Molecular Weight Polyethylene UHMWPE fiber. UHMWPE has the highest strength-to-weight ratio of any synthetic or natural fiber, and it floats. The integral Maxijacket High Performance coating firms the construction, increases wear life and helps keep contaminants out of the rope.
Maxibraid also has extremely low stretch and is laid firmer than Ultrex, sacrificing some tensile strength for longevity in tough field conditions. In many instances, we have found this firmer lay retains higher percentages of original breaking strength after use in the field for extended periods. Available in a variety of Maxijacket colors, which can help identify time in service, differentiate one rope from another or denote load ratings.
Maxibraid is comprised of Ultra High Molecular Weight Polyethylene fiber--the highest strength-to-weight ratio of any synthetic or natural fiber.
Maxibraid single braid style rope is comprised of unbelievably strong yet light UHMPE fibers that float.
Maxibraid's fiber has the highest strength-to-weight ratio of any synthetic or natural fiber, and it floats.
|Diameter (Inches)||Average Spliced Break Strength *(Lbs)||Minimum Spliced Break Strength *(Lbs)||Maximum Working Load 5:1 **(Lbs)||Weight (Lbs/100f)|
* Knots and abrupt bends significantly reduce the strength of all ropes and lower the maximum working load.
** Working load is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of the rope’s rated working load constitute hazardous shock load and would void the normal working-load recommendation. Consult Yale Cordage for guidelines for working loads and the safe use of rope.
Green working 226 ft. lbs./lb.
Red ultimate 6,342 ft. lbs./lb.
Specific Gravity: 0.97
Dielectric Strength: The maximum allowable leakage for clean, dry Maxibraid is 75 micro-amperes when tested at 100kV per Yale Method 712-1701 Rev 1 "Routine Production Test". Absorbed and entrained moisture or impurities will increase rope’s conductivity dramatically.
Approved Splice Technique: #10015112, #10018009.